Chinese translation for "curing speed"

固化速度
熟化速率

Related Translations:

curing:  （质粒）清除[从宿主细胞中除去质粒杯形环焙烘成化调制；烘烤涪烘固化；熟化混凝土养护聚合体凝固，固化，硬化；硫化；处理热化；成熟晒草湿治；养护食品加工（腌、熏等）熟化硫化硬化涂层干燥养护混凝土硬化(壳模)硬化，熟化，硫化自愈腌制

bacon curing:  培根肉的腌制

cured product:  加工食品〔包括腌、熏、晒、烤等硫化成品腌制的食品

curing state:  硫化程度

stalk curing:  茎秆晒干

curing frame:  调制架烟熏架

cold curing:  冷固化室温固化

cured crumb:  自硫胶粒

curing stand:  硫化机

manual curing:  手控硫化

Example Sentences:

	1.	While the curing speed of intra - gallery was slower than that of extra - gallery , exfoliation never happened 当蒙脱土层间的固化速度小于层外固化速度时，则不能。
	2.	By variation of curing agents of epoxy and modifier of clay , the different curing speed of intra - gallery and extra - gallery could be obtained 通过调节有机插层剂和固化剂，可以获得不同的层间和层外的固化速度。
	3.	The resin produced by the flame - retardant products with high strength and mechanical properties , thermal deformation temperature , curing speed , and good soak 该树脂所生产制品具有很高的阻燃性能和机械强度，热变形温度高，固化速度快，浸透性好。
	4.	Cure speed is fast . the time of initial cure is only 5minutes also in summer , 8 - 10minutes in winter . after 30minutes , the strength up to 80 % . post cure for 24h 硬化时间迅速，夏天5分钟左右即可初期固定，冬天则延至8 - 10分钟， 30分钟后可达80 %强度， 24小时后达到全力。
	5.	Results showed that temperatures have different effects on the curing speed of resin , the rate of moisture transmission , the degree of plastic melting and the degree of wheat straw decomposition 结果表明，热压温度对板坯中胶黏剂的固化速度、水分传递速度、塑料熔融程度、麦秸分解程度等都有不同程度的影响。
	6.	Xt - p1007 unsaturated polyester resin is reactive flame retardant resin , heat distortion temperature , curing speed , good soak and toughness , both major requirements for flame - retardant and high mechanical strength requirements pultruded products P1007不饱和聚酯树脂是反应型阻燃树脂，热变形温度高，固化速度快，优良的浸透性和韧性，主要应用于既要求阻燃又要求机械强度高的拉挤产品。
	7.	It was found that exfoliation of clay occurred when the curing speed of intra - gallery was faster than that of extra - gallery even the epoxy / clay compositions were cured at any temperatures , for any time and with any types of curing agents 研究表明，当蒙脱土层间的固化速度大于层外固化速度时，采用不同的固化剂，固化不同时间，在不同的温度下固化都可以得到剥离型的环氧/蒙脱土纳米复合材料。

Similar Words：

"curing room" Chinese translation, "curing salt" Chinese translation, "curing schedule" Chinese translation, "curing shed" Chinese translation, "curing shrinkage" Chinese translation, "curing stage" Chinese translation, "curing stand" Chinese translation, "curing state" Chinese translation, "curing strain" Chinese translation, "curing sungai" Chinese translation